Put Together A WASZP Toolbox

For proper maintenance of your WASZP, we recommend keeping these tools with you so you can perform necessary checks before sailing.

  • Needle nose pliers
  • Flathead Screwdriver
    • 4 mm (5/32”)
    • 5.5 mm (7/32”)
  • Phillips Screwdriver
    • PH1
    • PH2
    • PH3
  • Tubular Box Wrench (13 mm) (For wand nut)
  • Rubber Mallet (500 gram 50 mm face diameter)
  • Allen Wrench Set
    • 1.5 mm
    • 4 mm
    • 5 mm
    • 6 mm
  • T Handle Torx Wrench (T 30)
  • Adjustable Wrench (1 - 20 mm range or similar)
  • Wrenches
    • 8 mm (Pushrod nut)
    • 10 mm (Reversing Lever axle)
  • Electrical Tape
  • Loctite
    • 263 (High strength, for all bolts)
    • 243 (Low strength, for foil bolts)
  • WD40
  • Utility Knife
  • Lighter
  • Sikaflex (Black 291)
  • Files
    • Round
    • Flat
    • Thin Flat (under 2 mm thick)
  • Sandpaper
    • 80
    • 200
    • 600
    • 1000

FOILFAST also carries some specific tools that top level sailors have asked us to carry over the years if you would like to order these directly.  Search 'tools'.

Back to blog